To rescan an entire SCSI bus and re-register all devices found:

When dealing with fibre attached storage, it is necessary to issue a LIP (loop initialization primitive) on the fabric:

shell> echo "1" > /sys/class/scsi_device/0\:0\:0\:0/device/rescan

shell> echo "1" > /sys/class/fc_host/host#/issue_lip

Replace the “#” with the number of the SCSI bus to be rescanned.

Note: Issueing a LIP (above) on Red Hat Enterprise Linux 5 is all that is needed to rescan fibre
attached storage. Once the LIP is issued, the bus scan may take a few seconds to complete.

To rescan all other SCSI attached storage, a rescan should be issued:

shell> echo "- - -" > /sys/class/scsi_host/host#/scan

Replace the “#” with the number of the SCSI bus to be rescanned.